When a homeowner has an Iron Fence in Riverside installed on their property, they will want to take the needed steps in keeping it looking its best for as long as possible. Caring for an iron surface properly will keep it in the best of condition.
Here are some steps a homeowner can follow if they decide they would like to add some color to their iron fence.
Remove Any Rust From The Fence
In time iron may become rusted from excessive moisture. Any rust should be removed from the fence before it is painted. A piece of medium-grit sandpaper will remove rust with ease. Afterward a piece of fine-grit sandpaper can be rubbed over damaged areas to smooth the iron to the touch.
Clean The Fence In Its Entirety
It is important to clean the iron fence before adding color. This can be done with a garden hose or pressure washer and a cleaning agent made especially for iron surfaces. If there are plants around the fence, they should be covered with a tarp to minimize damage from the impact of water pressure when doing the cleaning process. The cleaner can be applied with a piece of non-abrasive cloth and then rinsed away afterward.
Apply The Paint With A Brush
A paintbrush should be used when applying paint to an iron fence. This will aid in application to all areas of spires and posts. Before paint is added, a coating of rust-inhibiting primer should be applied to the iron. This should be left in place to dry in its entirety before applying paint. Two coats of paint will give the fence vibrant color. Make sure to allow the first coat to dry entirely before applying the second coat.
When someone wishes to revitalize their property with an Iron Fence in Riverside, calling an installation company to do the job is best. Contact Mesa Fence Company to find out more about the fencing options they have available for their customers. Click Here to browse the selection available to obtain contact information so an installation can be scheduled right away.